Heating Effect of Electric Current

How Electric Current is Converted Into Heat?

When an electric current moves thru a conductor, there is a considerable friction between the moving electrons and the molecules of the conductor. The energy that is being produced as a result of this process is called "heat".

Practical Application

The heat that is being produced by the current can be used as heating appliances such as electric heater, soldering iron, kettle and the like. The major factor that affects the design of these equipments includes the material of the conductor or the resistive element. The objective is to produce the highest possible heat energy with minimal amount of electric current. Large amount of electric current posed a big safety risk considering the fact that most of these equipments are used n households where majority of the users are non-electrical professionals.

Figure 1. Nichrome Alloy
Nichrome Alloy- this material has a resistance of more than 50 times that of copper and around 70 times compare to aluminum. These means that it will produced at least 50 times more heat compare to copper and aluminum.

Essential Conversion Factor

1 Kwh = 36 x 10 exp(5) Joules
1 calorie = 4.186 Joules
1 kWh = 860 kcal

Example:

An electric kettle with nichrome as a heating element is required to raise the temperature of 1 kg of water from 10 degree C to 100 degree C for a period of 10 minutes. Solve for the required value of the resistance of nichrome if the kettle is to be supplied by a 240 Volts supply. Assume efficiency of the kettle to be 80%.

Solution:

specific heat of water = 1.0 kcal/kg.C

Energy received by water = mass x sp.heat x  (T2-T1)

                                            = (1 kg) x (1 kca/kg.C) x (100-10) C

                                            = 90 kcal x (1 kWh / 860 kcal)

                                           = 0.105 kWh

  • Electrical energy supplied to the kettle = 0.105 / 0.8 (at 80% kettle efficiency) = 0.131 kWh
  • Power = Energy/ time
  • Power supplied to the kettle in 10 minutes = 0.131 kWh / (10/60) .... 1hr = 60 mins
  • Power =  .786 kW = 786 watts

In electric circuit calculation at 240 V supply:

  • P= V (squared) /R   or 
  • R = V*V /  P = 240 (squared) / 786
 R = 74 ohms ----> answer

Summary:

  • The current that passes thru a conductor will produce heat.
  • Nichrome is one of the best heating elements available by several manufacturers
  • The heating element should produce high amount of heat for a minimal amount of current due to safety reasons
    .

7 comments:

  1. Electric kettle is so good, It has a very good features, I have electric kettle at my home and use it frequently when my mom will not be at home.
    Read here so you may get more about kettles and its uses.

    ReplyDelete
  2. is that same technique which is in electric kettle? to know more visit here

    ReplyDelete
  3. The blog article very surprised to me! Your writing is good about New AC Units this topic. In this I learned a lot! Thank you!

    ReplyDelete
  4. You have a real ability to write a content that is helpful for us. Thank you for your efforts in sharing such blogs to us. Emergency Electrician London

    ReplyDelete
  5. Great example with the electric kettle, I always like to read articles like this, i am electrician with an electrical interest in heating. I did an heating electrical install in Solihull electricians in Solihull

    ReplyDelete
  6. Nice post. I was checking constantly this blog and I am impressed! Extremely helpful information specifically the last part I care for such info much. I was looking for this particular info for a long time. Thank you and good luck. china heating cable

    ReplyDelete
  7. Hi, you used to write excellent articles, but the last several posts have been kinda boring… I miss your super writing. Past several posts are just a little out of track! china heating cable

    ReplyDelete